Seat Belt: Service and Repair

Front Seat Belts:

FRONT SEAT BELTS
Outboard Shoulder Harness/Lap Belt
1. Remove quarter trim panel.
2. Remove bolt holding seat belt retractor to quarter panel.
3. Separate retractor from vehicle.
4. Reverse the preceding operation for installation.

Inboard Seat Belt Buckle
1. Remove bolt holding inboard buckle to floor.
2. Disconnect seat belt sensor wire connector.
3. Separate buckle assembly from vehicle.
4. Reverse the preceding operation for installation.

Rear Seat Belts:

REAR SEAT BELTS
1. Remove rear seat as necessary to gain access to rear seat belts.
2. Remove bolt holding shoulder belt turning loop to seat back reinforcement panel.
3. Remove bolts holding rear seat belt retractor to floor kick-up
4. Remove bolts holding retractor to quarter panel reinforcement.
5. Remove bolts holding lap belt to lower quarter panel reinforcement.
6. Separate seat belt retractor from vehicle.
7. Reverse the preceding operation for installation.