Roof Sheet Metal - Dented/Wavy: Overview

NO: 23-11-98 Rev. A

GROUP: Body

DATE: May 8, 1998

SUBJECT:
Wavy Roof Sheet Metal

THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 23-11-98 DATED MARCH 13, 1998 WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDES A VEHICLE PRODUCTION DATE AFTER WHICH THIS PROCEDURE IS NO LONGER NECESSARY.

MODELS:
1998 (LH) Concorde/Intrepid

**NOTE:
THIS BULLETIN APPLIES TO VEHICLES BUILT PRIOR TO MARCH 9, 1998 (MDH-0309XX).**

SYMPTOM/CONDITION:





Wavy roof sheet metal or dents in the approximate area of the structural headliner membrane (Figure 1).

DIAGNOSIS:

Inspect the roof sheet metal for dents in the area of the structural headliner membrane. The membrane looks like a piece of cardboard 21" x 25" glued to the inside of the roof sheet metal. If dents or waves are apparent perform the Repair Procedure.

EQUIPMENT/PARTS REQUIRED:

1 05011398AA Adhesive Membrane Kit
1 08978(3M # ) Molding Removal Tool
1 C-6967 Miller Headliner Removal Tool
1 NPN Hot Melt Glue & Applicator

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

Labor Operation No. 23-85-41-91 1.9 Hrs.

FAILURE CODE: P8 - New Part