Front Crankshaft Seal: Service and Repair

REMOVAL
1. Remove crankshaft damper.
2. Remove timing belt.
3. Remove crankshaft sprocket and key.
4. Pry out the front seal with a flat tip screwdriver. Cover the end of the screwdriver with a shop towel.

CAUTION: Be careful not to nick or damage crankshaft flange surface or oil pump housing bore.

INSTALLATION

Front Crankshaft Oil Seal:

1. Install front crankshaft seal into oil pump housing using Special Tool MD-998718.
2. Reverse removal procedure for installation.