Front Crankshaft Seal: Service and Repair

REMOVAL

Removal Service Point
Crankshaft Front Oil Seal Removal





1. Make a notch in the oil seal lip with a knife, etc.
2. Cover the end of a flat-tipped screwdriver with a shop towel and insert into the notched section of the oil seal, and lever out the oil seal to remove it.

Caution: Do not damage the crankshaft and the oil pump case.

INSTALLATION

Installation Service Point
>A<Crankshaft Front Oil Seal Installation





1. Apply a small amount of engine oil to the oil seal lip and then insert.
2. Tap the oil seal into the cylinder block.