Auto-Cruise Control Cable Check and Adjustment

ACCELERATOR CABLE
1. Adjust with the adjusting nut A so when the link A hits the stopper, the accelerator cable play (inner cable play reaches the standard value.

Standard value: 2 - 3 mm (0.08 - 0.12 in.)

2. Fix the accelerator cable with the lock nut.




THROTTLE CABLE
1. Adjust with the adjusting nut B so when the lever B hits the link A, the throttle cable play (inner cable play) reaches the standard value.

Standard value: 1 - 2 mm (0.04 - 0.08 in.)

2. Fix the throttle cable with the lock nut.
3. Tighten the throttle lever-side adjusting bolt to the specified torque.




SPEED CONTROL CABLE
Hold the link C at the position where the lever C touches the link B. Then secure the speed control cable.