Infinity II System Replacement

REMOVAL

Negative Battery Cable Remote Terminal:

1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.

Fig.13 Infinity II Remote Amplifier Location:

2. Inside trunk, pull the trunk liner aside (right quarter panel passenger side).
3. Remove three retaining screws.
4. Disconnect two wire connectors.
5. Remove remote amplifier from vehicle.

INSTALLATION
1. Install remote amplifier into vehicle.
2. Connect two wire connectors.
3. Install three retaining screws.
4. Install the trunk liner (right quarter panel passenger side).
5. Connect the negative battery cable remote terminal to the remote battery post.