Transmission Cooler Lines Removal and Installation

REMOVAL





1. Loosen hose clamps at radiator connections and remove cooler hoses (Fig. 6).
2. Remove lines from transmission.
3. Remove lines from supports.

INSPECTION
Inspect all cooler lines and clamps. Replace as necessary.

INSTALLATION
1. Position cooler lines and connect to transmission. Torque flare nuts at transmission to 30 Nm (260 inch lbs.).
2. Connect cooler lines to supports.
3. Connect cooler hoses to radiator (Fig. 6). Tighten hose clamps to 3 Nm (28 inch lbs.).
4. Start engine and check transmission fluid level. Adjust as necessary.