Clutch: Service and Repair

<3.0L ENGINE>:

REMOVAL AND INSTALLATION
SERVICE POINTS







<< A >>
RELEASE FORK REMOVAL
Move the release fork in the direction shown to remove the clip from the fulcrum.







>> A <<
RELEASE FORK INSTALLATION
1. Apply Mitsubishi genuine grease part number 010101. or equivalent to the illustrated positions of the release fork.
2. Install the release fork to the fulcrum.






>> B <<
CLUTCH DISC AND CLUTCH COVER INSTALLATION
1. Apply Mitsubishi genuine grease part number 0101011 or equivalent to the clutch disc splines and rub it in the splines with a brush.
2. Using the clutch disc guide to position the clutch disc on the flywheel.
3. Install the clutch cover onto the flywheel.






>> C <<
OUTER RACE INSTALLATION
Press in the bushing into the release fork to the position shown in the illustration.






>> D <<
RELEASE FORK INSTALLATION
Apply Mitsubishi genuine grease part number 0101011 or equivalent to the illustrated positions of the release fork.






>>E<<
SEALING CAP INSTALLATION
Press in the sealing cap to the position shown in the illustration. Be sure that it is not installed in a slanted position.