Center Mounted Brake Lamp Replacement

REMOVAL
1. Open hood, disconnect and isolate the battery negative cable.
2. Release decklid latch and open decklid.
3. Remove decklid cover.

Fig.7 CHMSL - 300M:

4. Disconnect lamp socket(s) from housing (Fig.7).
5. Remove bulb(s) from socket(s).

INSTALLATION
1. Install bulb(s) in socket(s).
2. Install socket(s) into housing.
3. Connect battery negative cable and close hood.
4. Verify CHMSL operation.
5. Install decklid cover.