Seat Cushion Cover

SEAT CUSHION COVER

REMOVAL

1. Remove the front seat cushion.
2. Lay the seat cushion on a suitable surface with the cover facing down.




3. Unhook the two fabric tabs on the cushion shell (1).




4. Unhook the cover (2) all the way around the clip groove in the seat cushion shell (1).
5. Remove the cushion shell from the foam rubber pad.




6. Fold the cover (1) to the side and unhook the upholstery straps from the wire insert in the foam rubber pad (2).




7. Pull the lateral upholstery wire (2) out of the fabric sleeve in the cover (6) and unhook the upholstery straps (1,5) from the foam rubber pad (4).




8. Fold the cover (1) to the side and unhook the middle upholstery straps (2) from the wire insert (3) in the foam rubber pad (4).




9. Remove the cover (1) from the foam rubber pad (2).
10. Unhook the upholstery straps and pull the longitudinal upholstery wires out of the fabric sleeves in the cover (1).

INSTALLATION




1. Insert the longitudinal upholstery wires into the fabric sleeves in the cover (3).
2. Fold the cover over and position it on the foam rubber pad (1).
3. Hook the middle longitudinal upholstery wire onto the wire, insert it in the foam rubber pad (1) with the fabric straps (2).
4. Pull the rear lateral upholstery wire into the fabric sleeve in the cover (3).
5. Install the side longitudinal retainers and the rear lateral retainers.
6. Pull the cover (3) to the side over the foam rubber pad (1).

NOTE: Insert one additional retaining clip in clip groove at front center (arrow)




7. Position the seat cushion shell (1), align the cover (2) and hook the cover into the cushion shell (1) all the way around.
8. Hook fabric tabs on the left and right into the cushion shell. Trim the seam on cover in this area.
9. Ensure that the contour of the cover is positioned correctly.




10. Install the seat cushion (1).