Internal Failure - Amplifier

INTERNAL FAILURE - AMPLIFIER

For a complete wiring diagram refer to Diagrams/Electrical.

- When Monitored:

With the ignition on.

- Set Condition:

The module has failed the loop back test.





Diagnostic Test

1. INTERNAL FAILURE

With the scan tool, erase DTC's.

Cycle the ignition switch from off to on and wait approximately 1 minute.

With the scan tool, read DTC's.

Did this DTC reset?

Yes

- Replace the Amplifier.
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- Test complete.