Rear Bumper Reinforcement Bracket

REAR BUMPER REINFORCEMENT BRACKET

REMOVAL

1. Remove rear fascia.
2. Remove rear bumper reinforcement.

Fig. 9:

Fig. 10:

3. Remove two screws attaching reinforcement bracket (left or right side) (Fig. 9) or (Fig. 10).

INSTALLATION

1. Place reinforcement bracket into position.
2. Install two screws attaching reinforcement bracket (left or right side) (Fig. 9) or (Fig. 10).
3. Tighten screws to 95 N.m (70 ft.lbs.) torque.
4. Install rear bumper reinforcement.
5. Install rear fascia.