Front Door Opening Weatherstrip

FRONT DOOR OPENING WEATHERSTRIP

REMOVAL

1. Open front door.
2. Remove front door sill scuff plate.

Fig. 1:

Fig. 4:

3. Pull front door weatherstrip from door opening fence (Fig. 1) and (Fig. 4).
4. Remove door opening weatherstrip from vehicle.

INSTALLATION

1. Place front door opening weatherstrip into position starting at the upper rear corner of the B-pillar (Fig. 1) and (Fig. 4).
2. Work the weatherstrip down the B-pillar to the floor pan. Leave slack to ensure completion of the weatherstrip throughout the entire opening.
3. Starting at B-pillar going along the under side of the header and down the A-pillar leaving slack to ensure proper installation of the bottom portion of the weatherstrip.
4. Joint the two end of the weatherstrip together and ensure complete seating of weatherstrip.
5. Install front door sill scuff plate.
6. Close front door.