Vibration Damper - Installation

INSTALLATION




1. Install crankshaft damper using Special Tools C-4685-C1 (5.9 in.) Bolt (2), with Nut and Thrust Bearing from 6792, and 6792-1 (1) Installer.
2. Install vibration damper bolt. Torque bolt to 95 Nm (70 ft. lbs.).
3. Install the lower crossmember.
4. Install accessory drive belt.
5. Install the accessory drive belt splash shield and right front wheel.
6. Lower vehicle.
7. Install right engine mount.
8. Connect negative battery cable.