Crossfire Emblem

CROSSFIRE EMBLEM





NOTE: Use a commercially available and approved Wax and Grease remover to prep the painted surface. A mixture of 70% Isopropyl alcohol and 30% water is recommended.

NOTE: The temperature of the decklid and the emblem must be approximately 68°F (20°C) for proper adhesion.

1. Prep the painted surface for the application of the new adhesive.
2. Remove the protection paper (1) from the second 'S' (2).




NOTE: Use the cardboard backing to properly align the emblem with the bottom and sides of the decklid.

3. Position the emblem (1), and press on the second 'S' firmly (2).
4. Carefully remove the protection paper and secure each letter to the decklid.
5. Carefully remove the cardboard backing.
6. Press on each individual letter firmly to secure the emblem.
7. Clean any residue or markings from the decklid.