Installation

INSTALLATION





1. Inspect the fender for any remaining adhesive and remove any old adhesive.
2. Prep the painted surface for the application of the new louver adhesive strips.

NOTE: Use a commercially available and approved Wax and Grease remover to prep the painted surface.





3. Remove the protective covering from the three adhesive strips (1, 2, 3).




4. Insert the louver assembly into the front fender holes.
5. Rotate the louver toward the fender and insert the retaining clips into the clip holes in the fender.
6. Press the retaining clips into the clip holes in the fender.
7. Apply pressure to the tips of the louver assembly and adhere the louver to the fender.




8. Remove the protective covering from the forward adhesive strip (1).
9. Apply pressure to the front of the louver assembly and adhere the louver to the fender.