Driveshaft

DRIVESHAFT





NOTE: Only one side is shown. The procedure is the same for both sides.

1. Remove the spoiler mounting plate from the vehicle Mounting Plate.
2. Remove the spoiler motor from the mounting plate Motor.
3. Rotate the spoiler wing frame so the roll pin (2) is parallel to the mounting plate.
4. Using a roll pin punch, remove the roll pin (2).
5. Remove the spoiler wing frame nuts (1), and rotate the spoiler wing frame (4) up and out from the driveshaft (3).
6. Release the driveshaft (3) from the spoiler transmission and remove the driveshaft.