Installation

INSTALLATION

1. Replace the oil level indicator tube seal and lubricate with engine oil.

NOTE: The oil level indicator tube must be fully seated or oil leaks can occur.

2. Position the oil level indicator tube (2) and install it in the crankcase.
3. Install the bolt (1) in the cylinder head cover. Tighten to 10 Nm (89 in. lbs.).
4. Position the wire harness loom at the oil level indicator tube and fasten with new cable tie (3).
5. Install the air cleaner housing. Air Cleaner Housing - Installation.
6. Start the engine and check for leaks.