Front Lower Ball Joint - Installation

INSTALLATION





1. Clean the ball joint tapered bolt and the mounting hole of the steering knuckle.
2. Install the lower ball joint onto the steering knuckle and the lower control arm.
3. Install both nuts (1 and 2). Tighten to 105 Nm (77 ft. lbs.).




4. Install the front disc brake dust shield by installing and tightening the three hex bolts (1).




5. Install the front disc brake rotor (1). Brake Rotor - Installation.




6. Install the front disc brake caliper (1). Disc Brake Caliper - Installation.




7. Install the compressed front spring (1). Front Spring - Installation.




8. Install the front shock absorber bolt and nut (1). Installation.
9. Install the front wheel and tire assembly. Procedures.