Installation

INSTALLATION





NOTE: Replace the self locking bolts and shims. Lightly oil the bolt at the thread and bolt head contact surfaces.

1. Position the differential housing in the vehicle and support it with a jack.
2. Install the two differential housing rear mounting bolts (1) and washers.




3. Install the differential housing front mounting bolt (1).
4. Tighten the differential housing rear mounting bolts to 110 Nm (82 ft. lbs.).
5. Tighten the differential housing front mounting bolt and nut to 45 Nm (33 ft. lbs.).
6. Connect the halfshafts to the rear differential connecting flanges. Half Shaft - Installation.
7. Remove the differential housing support jack.
8. Install the propeller shaft. Propeller Shaft - Installation.
9. Fill the differential housing to proper specification. Service and Repair.
10. Lower the vehicle.