Diesel Data: Automotive Repair
Home >> Chrysler >> 2008 >> Pacifica V6-3.8L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Engine Mount >> Service and Repair >> Engine Mount - Installation >> Left Engine Mount

Left Engine Mount







INSTALLATION





1. Align engine mount to bracket and tighten upper engine mount fastener to 101 Nm (75 ft.lbs.).




2. Install the engine mount with bracket into position and hand tighten the upper engine mount bracket fasteners.
3. Raise and support the vehicle.
4. Install the left engine mount bracket lower fasteners. Tighten the fasteners to 68 Nm (50 ft.lbs.).
5. Remove the jackstand.
6. Install the engine mount to cradle fastener. Tighten the fastener to 101 Nm (75 ft.lbs.).
7. Lower the vehicle.
8. Tighten the upper engine mount bracket fasteners to 101 Nm (75 ft.lbs.).
9. Install the starter Starter Motor - Installation.
10. Install the left exhaust manifold Exhaust Manifold - Installation.
11. Install the radiator fan assembly Radiator Fan - Installation.
12. Install the cruise control servo.
13. Reconnect the negative battery cable.
Diesel-Data.com