Diesel Data: Automotive Repair
Home >> Chrysler >> 2008 >> Pacifica V6-3.8L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Engine Mount >> Service and Repair >> Engine Mount - Installation >> Right Engine Mount

Right Engine Mount







INSTALLATION





1. Align and Install mount bracket, if removed. Tighten top engine mount fastener to 101 Nm (75 ft.lbs.).




2. Install the right mount, bracket and bolts. Tighten bolts to 101 Nm (75 ft. lbs.).
3. Lower the engine and remove the jack stand.
4. Install the engine mount to cradle fastener. Tighten both engine mount to cradle fasteners to 101 Nm (75 ft. lbs.).




5. Install the right mount heat shield.
Diesel-Data.com