Right Engine Mount

REMOVAL

1. Disconnect the negative battery cable.
2. Raise vehicle on hoist.




3. Remove the right mount heat shield.
4. Remove the push pins for the in block heater (if equipped), the crankshaft sensor and the oxygen sensor from the engine mount bracket.
5. Support the engine with a jack stand.
6. Remove the engine mount bracket fasteners from the transaxle.
7. Remove the right engine mount to cradle fastener.
8. Loosen the front engine mount to cradle fastener.
9. Raise and support the engine with the jack stand.




10. Remove the engine mount.
11. Separate the engine mount from bracket.