Diesel Data: Automotive Repair
Home >> Chrysler >> 2008 >> Pacifica V6-4.0L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Accessories and Optional Equipment >> Parking Assist Control Module >> Service and Repair >> Installation

Installation







INSTALLATION





1. Position the Park Assist Module (1) and install the two attaching screws (2). Tighten screws to 3.5 Nm (30 in. lbs.).




2. Connect the Park Assist Module electrical connector (1).
3. Install the left quarter trim panel Console Shifter Bezel - Installation.
4. Connect the battery negative cable.
Diesel-Data.com