Description

DESCRIPTION





WARNING: Due to propeller shaft imbalance concerns, the propeller shaft can only be serviced as an assembly.

AWD models utilize a "three-piece" propeller shaft to transmit torque to the rear driveline module assembly. This three-piece design consists of:

- Front (3), center (5) and rear (7) shaft segments.
- Plunging front CV joint (2)
- Center support bearings (4,6)
- Rubber coupler (9) at driveline module flange (1)

The front shaft segment utilizes a plunging CV joint at the power transfer unit connection. The center and rear shaft segments utilize a support bearing/bracket assembly. The rear shaft segment uses a rubber coupler at the driveline module flange.