Engine Cooling Radiator - Installation

INSTALLATION





1. Position the radiator into engine compartment. Seat the radiator assembly lower rubber isolators into the mounting holes in radiator lower support.
2. Install the radiator mounting bracket (1) and bolts (2). Tighten to 12 Nm (106 in. lbs.).
3. Position the condenser on radiator and install upper mounting bolts. Tighten bolts to 6 Nm (50 in. lbs.).
4. Raise the vehicle.










5. Install the lower condenser mounting bolts. Tighten bolts to 10 Nm (88 in. lbs.)
6. Install the lower radiator hose (1) and clamp.
7. Lower the vehicle.










8. Install the radiator fan Cooling Fan - Installation.
9. Install the upper radiator upper hose. Align hose so it does not interfere with the accessory drive belt or engine. Position hose clamp so it will not interfere with the hood.
10. Install the upper radiator closure panels.
11. Connect the negative cable.
12. Fill the cooling system with coolant Service and Repair.
13. Operate the engine until it reaches normal operating temperature. Check the cooling system and automatic transmission for the correct fluid levels.