Right

RIGHT





1. Disconnect negative battery (1) cable.





2. Remove upper intake manifold Intake Manifold - Removal.
3. Disconnect electrical connectors from ignition coils (1).





4. Disconnect capacitor electrical connector (2).
5. Remove PCV hose from cylinder head cover grommet.
6. Remove ground strap from cylinder head cover stud (1).
7. Disconnect electrical harness retaining clips from cylinder head cover studs. Reposition electrical harness.
8. Remove fastener attaching ignition coil capacitor.
9. Remove ignition coils.





10. Remove foam insulator (1).





11. Loosen all cylinder head cover fasteners.

NOTE: Cylinder head cover attaching bolts are captured to the cover.

CAUTION: Make certain the double ended studs in the center of the cylinder head cover are loose before attempting to remove cover.

12. Remove cylinder head cover.