Supply Hose

INSTALLATION





1. Install reservoir end of supply hose (3) on reservoir hose fitting. Install clamp securing hose in place.





2. 2.7L/3.5L Engines - Install supply hose (3) on pump. Install clamp (2) securing hose in place.





3. 5.7L/6.1L Engines - Install supply hose (3) on pump (1). Install clamp securing hose in place.





4. 3.0L Diesel Engine - Install supply hose (3) on pump (1). Install clamp (2) securing hose in place.

5. Install air cleaner housing and inlet tube. Air Cleaner Body - Installation





6. Connect battery negative cable (2) to battery post. It is important that this is performed properly. Battery Reconnection
7. Fill and bleed power steering system. Power Steering System Bleeding