Crankshaft Main Bearing

Crankshaft Main Bearing

Crankshaft Main Bearing Cap - Inner Main Cap Bolts 20 Nm (15 ft. lbs)+1/4 Turn
Crankshaft Main Bearing Cap - Outer Main Cap Bolts 27Nm (20 ft. lbs)+1/4 Turn

Diameter 63.987-64.013 mm (2.519-2.520 in.)
Main Bearing Diametrical Clearance 0.032-0.062 mm (0.0013-0.0024 in.)
Bearing Clearance (Wear Limit) 0.072 mm (0.0028 in.)
Out-of-Round (MAX) 0.008 mm (0.0003 in.)
Diametrical Taper (MAX) 0.010 mm (0.0004 in.)
End Play 0.048-0.260 mm (0.002-0.010 in.)
End Play (MAX) 0.37 mm (0.015 in.)

MAIN BEARING SELECTION CHART