Reservoir, Power Steering Pump - Installation

INSTALLATION





1. Install reservoir (2) on coolant bottle (4) by sliding it into guide and allowing it to lock into place.
2. Install return hose (1) on reservoir hose fitting. Install clamp securing hose in place.
3. Install supply hose (3) on reservoir hose fitting. Install clamp securing hose in place.
4. Install air cleaner housing and inlet tube. Air Cleaner Body - Installation





5. Connect battery negative cable (2) to battery post. It is important that this is performed properly. Battery Reconnection
6. Fill and bleed power steering system. Power Steering System Bleeding