Headliner: Service and Repair

Headlining:

Body style 52

Headlining:

Body style 53

REMOVAL
1. Remove sun visors and vanity mirrors.
2. Remove sun visor center supports.
3. If equipped, remove coat hooks.
4. If equipped, remove roof rail modules.
5. Remove A-pillar trim covers.
6. Remove B-pillar upper trim cover/s.
7. Remove C-pillar upper trim covers.
8. Remove D-pillar upper trim covers.
9. Remove rear door opening header trim.
10. If equipped, remove overhead console.
11. If equipped, remove reading lamp.
12. Remove dome lamp lens.
13. Remove screws holding dome lamp to roof bow.
14. Disengage dome lamp wire connector from body harness.
15. Remove push-in locking fasteners holding headlining to rear roof header.
16. Separate headlining from roof.
17. Extract headlining through rear door opening.

INSTALLATION
1. Insert headlining through rear door opening.
2. Place headlining in position on roof.
3. Install push-in locking fasteners to hold headlining to rear roof header.
4. Engage dome lamp wire connector into body harness.
5. Install screws to hold dome lamp to roof bow.
6. Install dome lamp lens.
7. If equipped, install reading lamp.
8. If equipped, install overhead console.
9. Install rear door opening header trim.
10. Install D-pillar upper trim covers.
11. Install C-pillar upper trim covers.
12. Install B-pillar upper trim cover/s.
13. Install A-pillar trim covers.
14. If equipped, install roof rail modules.
15. If equipped, install coat hooks.
16. Install sun visor center supports.
17. Install sun visors and vanity mirrors.