A. Bolt Inspection

1. Open rear liftgate.

2. Unlatch the third seat from the floor anchors and flip the seat up so that the bottom is visible.





3. Inspect the identification number located on the six (6) rear seat riser to seat assembly bolt heads (Figure 1). If any bolt has a "2" marked on the bolt head. bolt replacement is required. Bolts with a number "10" clearly marked on the bolt head are OK.

4. Open the sliding door(s).





5. Inspect the identification number located on the eight (8) middle seat riser to seat assembly bolt heads (Figure 2).

6. If any bolt has a "2" marked on the bolt head, bolt replacement is required. Continue with Step "B". If all bolts have a "10" clearly marked on the bolt head, no further action is necessary. Latch the third seat into position and return the vehicle to the customer.