Removal

1. Raise and support vehicle.
2. Remove front wheel and tire assemblies.

Fig. 2 Double Pin Disc Brake Caliper:

3. Remove two caliper-to-knuckle attaching bolts, then remove caliper by sliding away from adapter and lifting off rotor. Support caliper firmly to prevent weight of caliper from damaging flexible hose.
4. Remove outboard brake pad from caliper adapter.
5. Remove disc brake rotor.
6. Remove inboard brake shoe assembly by sliding it out along bottom adapter abutment until brake shoe assembly loosens from anti-rattle clip.
7. Remove anti-rattle clip from top of adapter abutment.