Stabilizer Bar: Service and Repair

Fig. 8 Positioning strut bar bushing retaining nuts (Typical):

1. Disconnect strut bars from lower control arms, then from strut bar bracket.
2. Disconnect stabilizer bar from lower control arm, then from frame.
3. Remove strut bar and/or stabilizer bar from vehicle.
4. Reverse procedure to install. Tighten stabilizer bar bushing attaching nuts until distance from top of threads to top of nuts is 0.59-0.67 inch.
5. Tighten strut bar attaching nut until distance between the end of strut bar and the front surface of the locknut is 3.09 inches.