Headliner: Service and Repair

REMOVAL
1. Remove screws holding sun visor to roof header panel.
2. Disengage wire connector from lighted vanity mirror, if so equipped.
3. Separate sun visors from vehicle.
4. Remove A-pillar trim covers.
5. Remove B-pillar trim panels, if vehicle is a 4 door.
6. Remove (upper) quarter panel trim panels.
7. Remove assist handles, if so equipped.
8. Remove sun visor hooks.
9. Remove coat hooks, if vehicle is a 4 door.
10. If vehicle is equipped with a sunroof;
a. Open sunroof.

Sunroof Opening Trim Welt:

b. Remove trim welt around sunroof opening.
c. Remove sunroof switch pod.
d. Disconnect sunroof switch pod wire connectors.
e. Remove screw holding switch pod retainer to roof.
11. Remove push-in fastener at rear of headlining.
12. Disengage dome lamp wire connector, at rear of headlining.
13. Remove push-in fastener holding wiring to C-pillar.

Headlining:

14. Remove headlining through door opening.

INSTALLATION
1. Position headlining in vehicle.
2. Install sun visor hooks.
3. Install coat hooks, if vehicle is a 4 door.
4. Install push-in fastener at rear of headlining.
5. install assist handles, if so equipped.
6. Install push-in fastener holding headliner wiring to C-pillar.
7. Engage dome lamp wire connector, at rear of headlining.
8. If vehicle is equipped with a sunroof;
a. Install screw holding switch pod retainer to roof.
b. Connect sunroof switch pod wire connectors.
c. Install sunroof switch pod.

Sunroof Opening Trim Welt:

d. Install trim welt around sunroof opening.
e. Close sunroof.
9. Install (upper) quarter panel trim panel.
10. Install B-pillar trim panels, if vehicle is a 4 door.
11. Install A-pillar trim covers.
12. Install sun visors, lighted vanity mirror wire connector, if so equipped, and screws holding sun visors to roof header panel.