Fuel Injector Resistance Test

Measurement of Resistance between Front Bank Terminals

1. Disconnect the injector connector.

Checking Fuel Injector:

2. Measure the resistance between terminals.

Standard value: 2 - 3 ohms [at 20°C (68°F)]

3. Install the injector connector.

Measurement of Resistance between Rear Bank Terminals

Injector Intermediate Harness Connector:

1. Disconnect the injector intermediate connector.
2. Measure resistance between terminals.

Standard value: 2 - 3 ohms [at 20°C (68°F)]