Diesel Data: Automotive Repair

Installation

PROCEDURE

Front Hold Down Clip And Brake Shoe:





1. Install front brake shoe and hold down clip.

Brake Shoe And Upper Spring:





2. Install rear brake shoe and the upper brake shoe to shoe return spring.
3. Pull rear brake shoe over anchor block until properly located on adapter.

Brake Shoe Lower Return Spring:





4. Install the lower shoe to shoe return spring.

Park Brake Shoe Adjuster Assembly:





5. Install brake shoe adjuster assembly with star wheel rearward.

Rear Brake Shoe Hold-Down Clip:





6. Install rear brake shoe hold down clip.
7. Adjust brake shoes to a diameter to 171 mm (6.75 inch).
8. Install rear hub and bearing assembly on spindle.
9. Install A NEW hub and bearing assembly retaining nut. Torque the hub and bearing assembly retaining nut to 168 Nm (124 ft. lbs.).
10. Install hub and bearing assembly dust cap.
11. Install rear rotor.
12. Install rear disc brake caliper on the adapter.
13. Install wheel and tire assemblies.
14. Tighten wheel stud nuts to 109 - 150 Nm (80 - 110 ft. lbs.).