Removal

PROCEDURE
1. Remove rear disc brake caliper assembly from adapter and rotor. Service and Repair
2. Remove rear rotor from rear hub.
3. Remove dust cap from rear hub.
4. Remove rear hub and bearing assembly retaining nut and washer.
5. Remove rear hub and bearing assembly from rear spindle.

Rear Brake Shoe Hold-Down Clip:

6. Remove rear brake shoe assembly hold down clip.
7. Turn brake shoe adjuster wheel until adjuster is at shortest length.

Park Brake Shoe Adjuster Assembly:

8. Remove adjuster assembly from the parking brake shoe assemblies.

Brake Shoe Lower Return Spring:

9. Remove lower shoe to shoe spring.

Brake Shoe And Upper Spring:

10. Pull rear brake shoe assembly away from anchor. Then remove rear brake shoe and upper spring.

Front Hold Down Clip And Brake Shoe:

11. Remove front brake shoe hold-down clip. Then remove front brake shoe assembly.