Harmonic Balancer - Crankshaft Pulley: Service and Repair

REMOVAL
1. Raise vehicle and remove accessory drive belt splash shield.
2. Remove accessory drive belts.





Fig. 54

3. Remove crankshaft bolt and washer (Fig. 54).

NOTE: Crankshaft damper is a "slip fit", and does not require use of a puller to remove.

4. Remove crankshaft damper (Fig. 54).

INSTALLATION
1. Install crankshaft damper (Fig. 54).
2. Install crankshaft damper bolt and washer (Fig. 54). Tighten to 135 Nm (100 ft. lbs.).
3. Install accessory drive belts.
4. Install drive belt splash shield and lower vehicle.