Solenoids and Vacuum Harness

SOLENOIDS AND VACUUM HARNESS

REMOVAL





NOTE: For specific solenoid location, refer to (Fig. 33).

1. Remove solenoid mounting bracket screws (Fig. 33).
2. Disconnect solenoid electrical connector.
3. Disconnect vacuum harness connector from solenoid.





4. Push on solenoid lock tab and slide solenoid off bracket (Fig. 34).

INSTALLATION
1. Slide solenoid onto mounting bracket until lock tab engages (Fig. 34).
2. Connect vacuum harness connector to solenoid.
3. Connect solenoid electrical connector.
4. Install screws securing solenoid mounting bracket to air cleaner housing (Fig. 33).