Harmonic Balancer - Crankshaft Pulley: Service and Repair

VIBRATION DAMPER

REMOVAL
1. Remove accessory drive belts.
2. Remove crankshaft damper bolt.





3. Remove damper by using Special Tool 1026 and Insert 6827A (Fig. 88).

INSTALLATION
1. Install crankshaft damper using Special Tool 6792 (M12 1.75 x 150 mm bolt, washer, thrust bearing and nut).

NOTE: Lubricate the threads of the M12 1.75 x 150 mm bolt using leopard Nickel Anti-seize Compound or equivalent, before beginning to press the damper on.





2. Apply Mopar Lock & Seal Adhesive (Medium Strength Threadlocker) to crankshaft damper bolt and tighten to 136 Nm (100 ft. lbs.) (Fig. 89).
3. Install accessory drive belts.