Oil Line: Service and Repair

OIL COOLER & LINES

REMOVAL
1. Raise vehicle on hoist.
2. Drain cooling system.





3. Disconnect oil cooler coolant hoses (Fig. 118).
4. Remove oil filter.





5. Remove oil cooler connector bolt (Fig. 119).
6. Remove oil cooler.

INSTALLATION





1. Replace oil cooler seal (Fig. 120).





2. Lubricate seal and position oil cooler to oil filter adapter, aligning notch to tab (Fig. 121).
3. Install oil cooler connector bolt. Torque connector bolt to 55 Nm (41 ft. lbs.) (Fig. 119).
4. Install oil filter.
5. Connect oil cooler coolant hoses (Fig. 118).
6. Lower vehicle.
7. Fill cooling system.