Turbo Boost Gauge: Service and Repair

REMOVAL
1. Open hood, remove battery negative cable. Wait two minutes for the airbag system reserve capacitor to discharge before beginning component service.
2. Remove both left and right A-pillar trim panels .
3. Remove the instrument panel top cover .
5. Remove the turbo boost gauge bezel.
6. To change bulb, turn counterclockwise and pull out.

INSTALLATION
1. To change bulb, place new bulb in opening and turn clockwise.
2. Install the turbo boost gauge bezel.
3. Install the turbo boost gauge assembly.
4. Install the instrument panel top cover .
5. Remove both left and right A-pillar trim panels.
6. Connect the battery negative cable.
7. Verify vehicle and system operation.