Diesel Data: Automotive Repair
Home >> Dodge >> 2008 >> Caliber SRT-4 L4-2.4L Turbo VIN F >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Seals and Gaskets >> Service and Repair >> Seal- Input Shaft >> Installation

Installation







INSTALLATION





NOTE: Seal should be set to 4mm (.16 in) sub-flush.

1. Install the input shaft seal (2) 4mm (.16 in) sub-flush using Installer MD-998323 (1).
2. Install the transmission Manual Transmission/Transaxle - Installation.
Diesel-Data.com