Installation

INSTALLATION





1. Filler tube assembly.




2. Groove in filler tube rubber is for the body sheet metal.




3. Insert filler tube into the fuel tank rubber hose.




4. Slide hose clamp into place and tighten.




5. Hose clamp in place and tighten.




6. Install filler tube mounting bolt.




7. Install Filler tube vent line.




8. Install the underbody splash shield.




9. Install the left inner splash shield.
10. Install the left rear tire.
11. Lower vehicle.




12. Filler tube rubber at body opening.
13. Pull rubber through opening and install to body. Make sure that the sheet metal is in the groove in the rubber.




14. Start the metal wire retaining wire in the groove on the inside of the filler tube rubber.




15. Work wire retaining wire around the rubber.




16. Wire retainer install.
17. Connect negative battery cable.
18. Fill fuel tank.