Seat Belt Buckle - Installation

INSTALLATION

FRONT SEAT BELT BUCKLE






1. Position the front seat belt buckle onto the stud near the rear of the inboard seat cushion frame.
2. Install the retaining nut onto seat cushion frame. Tighten the nut to 43 Nm (32 ft. lbs.)
3. Connect the seat belt buckle electrical connector.
4. Install the seat cushion side shield.
5. Install floor console Floor Console - Installation.

WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.

WARNING: Following successful completion of the Airbag System test procedure, the Occupant Classification System Verification Test must be done using a scan tool and the appropriate diagnostic information.



REAR SEAT BELT BUCKLE






1. Position the rear seat belt buckle onto mounting studs (3).
2. Install retaining nut. Torque nut to 34 Nm (25 ft. lbs.).
3. Install rear seat cushion Seat Cushion / Cover - Installation.