Crankshaft - Removal

REMOVAL





1. Remove the vibration damper (1)Vibration Damper - Removal.




2. Remove the rear oil seal retainerCrankshaft Rear Oil Seal Retainer - Removal.
3. Remove the oil panEngine Oil Pan - Removal.
4. Remove the oil pump pickup.
5. Remove the windage tray/oil pan gasket.




6. Remove the timing chain coverTiming Cover - Removal.




7. Remove the oil pumpEngine Oil Pump - Removal.




8. Remove the timing drive (2) Timing Chain & Sprockets - Removal.




9. Identify rod bearing caps before removal. Remove rod bearing caps with bearings.
10. Identify main bearing caps (1) before removal.




11. Remove main bearing caps (1) and bearings one at a time.




12. Remove the thrust washers.
13. Remove the crankshaft out of the block.