Amplifier - Removal

REMOVAL






INSTRUMENT PANEL AMPLIFIER






NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. Battery Reconnection.

1. Disconnect and isolate battery negative cable.
2. Remove the steering column opening cover. Steering Column Opening Cover - Removal
3. Disconnect electrical harness connectors.




4. Remove the mounting fasteners (1).
5. Remove the amplifier (2).


REAR SHELF AMPLIFIER (SRT ONLY)






1. Disconnect and isolate the battery negative cable.
2. Remove the rear shelf trim. Removal.
3. Remove the four mounting fasteners (2).
4. Disconnect the electrical connector.
5. Remove the amplifier from the mounting plate (1).