Left

LEFT EXHAUST MANIFOLD





NOTE: If replacing the exhaust manifold, tighten the exhaust outlet studs to manifold to 40 Nm (350 in.lbs.).

1. Position the exhaust manifold (7) and gasket (1). Install the retaining bolts (2). Tighten 4 bolts starting at the center working outward to 23 N.m (200 in. lbs.).
2. Install the exhaust manifold heat shields (5,6). Tighten the bolts to 12 Nm (105 in. lbs.).
3. Tighten the out most stud nuts to 8 Nm (73 in.lbs.).
4. Connect the oxygen sensor.
5. Raise and support the vehicle.
6. Connect the exhaust pipe to manifold union (3). Tighten the exhaust stud nuts to 34 Nm (300 in.lbs.).
7. Connect the negative battery cable.