Right

RIGHT EXHAUST MANIFOLD





1. Clean gasket surfaces.

NOTE: If replacing the exhaust manifold, tighten the exhaust outlet studs to 39 Nm (350 in.lbs.).

2. Position the exhaust manifold and gasket. Install the retaining bolts. Tighten 4 bolts starting at the center working outward to 23 N.m (200 in. lbs.).
3. Install the heat shields. Tighten the heat shield fasteners to 12 Nm (105 in.lbs.).
4. Tighten the 2 out most nuts to 8 Nm (73 in.lbs.).
5. Connect the oxygen sensor.
6. Raise and support the vehicle.
7. Connect the front exhaust pipe to exhaust manifold. Tighten the fasteners to 34 N.m (300 in. lbs.).
8. Connect the negative battery cable.